rc

Spirit System FBL :: Intro and Firmware Update

This video is the first in a series. I am checking out the Spirit FBL from http://spirit-system.com. This flight controller uses the same rescue (bailout) as the much more expensive Bavarian Demon flight controllers. It has vibration analysis,…



Flight Model Apollo 50 :: Tail Assembly

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

This video covers the tail assembly…I don’t cover the control connections here tho..that’s coming up in future videos. This is rudder, horizontal stabilizer, and elevators. Taking my time on this part makes for a more precise flyer in the end.

Share this!



Flight Model Apollo 50 :: Wing Assembly

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

This video covers the wing assembly portion of my Flight Model Apollo 50 build.

Share this!



“The Age of The Drone” from Zoot Pictures – Premiers 19 Feb 2015

“The Age of The Drone” from Zoot Pictures – Premiers 19 Feb 2015

The documentary from Zoot Films is releasing on Canadian Broadcast Corporation at 9PM tonight, 19 Feb 2015.

I am unsure how or when it can be viewed outside of Canada.  I will have access to this soon, as Zoot Pictures is sending me a copy of the DVD. Hopefully I can get my hands on it soon, and I will share my opinion.

http://www.strictlydocs.com/cbcdrone/

http://diydrones.com/profiles/blogs/cbc-documentary-the-age-of-the-drone

http://zootpictures.com/?s=inproduction

From Zoot Pictures:

There’s a new revolution happening…



CPO Heli Hangout #39! Feb 13 2015

Hanging out…talking helis.

 

Share this!



CPO Heli Hangout #38! Jan 16 2015

Hanging out…talking helis.

Share this!



Flyzone A6M2 Zero – TX-Ready Unboxing

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDXUB&P

Long-ranged, fast, and more maneuverable than any Allied aircraft of the time, the Japanese Zero was the ultimate aggressor. With its combination of looks, performance, and unique features, the Flyzone Select Scale Zero is an elegant representation of the power and lethal beauty of the Zero. This bird is authentic all the way from the trim scheme and brushless motor system down to the replica bomb drop and retractable electric landing gear



Tower Hobbies Cutback 1/10 Scale 4WD RTR Short Course Truck

In this video, I take you along for a ride in the Cutback from Tower Hobbies. This thing is very fun, and can handle some abuse. Seems to last a long time a single battery charge, and cleans up easy. I highly recommend this!

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXENWR

Share this!



CPO Heli Hangout #37! Jan 2 2015

Hanging out…talking helis.

 

Share this!



My Pretty Epic FPV 250 Quad Crash

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

Frame is a DRQ250. Did you count the number of rolls? And I just picked it up and kept flying. Amazing little guy!

Share this!



The Most Awesome RC Review EVAR!

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

This honestly is the best RC review video you will probably ever see. Not only do I do an unboxing, review, and flight…I also add a GoPro AND even perform the first re-boxing demonstration. This, folks, has never been done before. You saw it here first!

Share if it made you smile at least once!

Flying Alien Sphere – Yes, it’s…



CPO’s FPV 250 Racing Quad – Current Setup and TX/Telemetry (DRQ250)

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

This video shows you what the near final assembly of my FPV 250 quadcopter looks like. I’ve made a few changes from the original placement of components based on feedback from Facebook…so I thank you all for that.

I do have another build video coming, which covers the top half of the build, but I wanted to get this out…



CPO’s FPV 250 Racing Quad – Motors, ESCs, Power (DRQ250)

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

This video covers the dirty section assembly on the DRQ250 FPV racing quad that I am building. This is how I chose to put the lower half together, and I think this is going to work out nice for my needs. Next video will cover the clean section and final assembly of the two sections.



DRQ250 Maiden Basement Hover

I couldn’t wait until tomorrow to do a maiden…so I had to do a quick test hover in the basement. So far so good…

Share this!



DF DRQ250 (Mini D) Frame Assembly (Dirty and Clean Sections)

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

In this video I complete the build of the dirty and clean sections on the Drone Frames DRQ250 (Mini-D) FPV racing quad I am putting together.

The assembly is pretty straight forward, but I tried to really simplify the assembly for you by showing a lot of detail during the process. My plan was to make this the easiest-to-follow-along 250…



CPO’s FPV 250 Racing Quad – Overview

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

Hey everyone! In this video I am showing you the components for my FPV Racing Quad. ReadyMadeRC was gracious enough to send me some gear for build and review…and I intend to share it all with you!

This will be a multi part series, starting with this video…the intro. This video is a little “talky” I admit…but I really wanted…



CPO Heli Hangout #36!

Hanging out…talking helis. And…multirotors! LOL!

Great discussion, and it seems there are more and more people…heli people…who are looking at FPV quad racing as a viable outlet in the hobby. We had a lot discussion on fpv racing quads (250 sized) and their components. What better person to have on the hangout for this than Joe Estes from Ready Made RC (http://readymaderc.com). He was also nice enough to throw us a discount code to use in…



798267_392833960807897_669084811_o

RC Hangar Time Episode 61 – Pre Flight Rituals

In this episode Dustin and I talk about pre flight things that need to be done and checked before putting up your plane, heli, or multirotor to ensure you have a safe fight.  We also chat a bit about HAM licensing and I share my experience with getting my General Class license (although only a Technician license is necessary for FPV).  We also discuss my procurement of Fat Shark Dominator V2 goggles, and Dustin shares…



maxresdefault

CPO Heli Hangout #35!

 

Share this!



Dromida DT4.18 1/18th Scale Desert Truck with LEDs

Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! http://everythingcpo.com

This is our first look at the Dromida DT4.18 1/18th Scale Desert Truck with LEDs. This is a very fun, yet simple vehicle to operate, and I am sure it will give CJ and I many hours of great RC action. Next up will be a video on installing the speed kit!

Dromida Link:
http://www.dromida.com/surface/didc0046-dt418/index.html

Tower Hobbies Link: